Onkar AP Signages is a trading company, and this division is an authorised distributor of cutting tools — solid carbide, HSS, brazed and special tooling supplied to automotive, general engineering, oil and gas and other manufacturing industries through our branches. Manufactured by Aayudh Tools (Aayudh Synergies Pvt. Ltd.).
Supplied from PCMC · Pune · Satara · Authorised distributor of cutting tools
Manufactured by
Aayudh Tools
Total solutions in solid carbide, brazed & HSS
A trading company of seven years' standing, supplying advertising and signage material across Maharashtra — and now industrial carbide tools as authorised distributors for Aayudh Synergies Pvt. Ltd.
Onkarap Signages Pvt. Ltd. is a trading company with three branches across Pune, PCMC and Satara. We have been associated with the market for the last seven years, supplying every kind of advertising and signage material within Maharashtra. We have now started an additional business in industrial carbide tools — as authorised distributors for Aayudh Synergies Pvt. Ltd., we supply cutting tools, solid carbide, HSS, brazed and special tooling to the automotive, general engineering, oil and gas and other manufacturing industries, as per client requirement.
Company
Trading Company
Onkarap Signages Pvt. Ltd.
In market
7 Years
Since 2019
Branches
Three
Pune · PCMC · Satara
Tools by
Aayudh Tools
Aayudh Synergies Pvt. Ltd.
Our role
Onkarap Signages Pvt. Ltd. is a trading company. Our cutting tools division is an authorised distributor for Aayudh Synergies Pvt. Ltd., supplying cutting tools — solid carbide, HSS, brazed and special tooling — to the automotive, general engineering, oil and gas and other manufacturing industries as per client requirement, through our branches at Pune, PCMC and Satara. We handle application enquiries and coordinate supply, special-tool development and reconditioning with the manufacturer.
Standard geometries where a catalogue size fits, and ground-to-drawing tooling where it does not.
The core range — drills, end mills, reamers and step tools
Solid carbide tooling for production machining, including standard geometries and application-specific grinds. Aayudh has supplied solid carbide tools to Indian industry for over a decade.
Ground to your component, not to a catalogue
Special step tools and combination profile / form tools developed around a specific component and operation. This is the part of the range built entirely to drawing.
High-speed steel tooling for general engineering
HSS end mills, cutters, drills and reamers supplied alongside the carbide range so a single order can cover a full tool crib. Carries the Vajra name in Aayudh's material.
Carbide-tipped tooling for heavier, larger-diameter work
Brazed carbide tooling where a tipped construction suits the diameter or the operation better than solid carbide — typically larger counterbores, step tools and reamers.
Production drilling in a single pass, ground for chip evacuation.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Milling and profiling, in standard and application-specific grinds.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Drills and steps a hole in one entry — fewer tool changes per cycle.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Multi-diameter tool replacing a sequence of separate operations.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Cuts a finished profile in one pass instead of interpolating it.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Aayudh's 'Dreamer' — drilling and reaming combined into one tool and one entry.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Two operations combined with a profile milling form tool — Aayudh's core speciality.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Flute form plus flute finish, specified together to address chip flow and built-up edge.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
General-purpose milling for job-shop and maintenance work.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Cuts T-slots and undercuts on machine tables and fixtures.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Twist drilling across general engineering materials.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Finish reaming to size on taper-shank machine spindles.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Carbide-tipped cutter for larger-diameter facing and counterboring.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Tipped step tools and reamers where solid carbide is not the economical choice.
Diameter, flute count, geometry, coating and carbide grade are set against your component and operation. Share a drawing or sample for a quotation.
Four situations that come up on almost every shop floor — and the tooling approach for each.
Too many tool changes in the cycle
A drill-and-reamer combination — Aayudh calls it the Dreamer — does in one entry what normally takes two tools and two changes. The same logic drives their combination profile and form tools.
Chip flow and built-up edge
Built-up edge and poor chip evacuation shorten tool life long before the cutting edge wears out. Aayudh's FP (flute polish) tools pair the flute form with the flute finish to address both.
PCD tooling is too expensive for the batch
For small to medium batches of non-ferrous components, Aayudh's 'N' geometry and coated tools are positioned as the middle path between conventional solid carbide and PCD.
Stated by Aayudh Tools
Aayudh states these give 30–50% of PCD life and 2.5–3× the life of conventional solid carbide, where PCD tools typically cost 5–10× solid carbide.
Replacing complex tools that still have life in them
Standard drills, end mills and reamers are routinely reground — but complex and combination tools usually get scrapped. Aayudh's Re-New service returns those to service.
Stated by Aayudh Tools
Aayudh states that after renewing a tool, 80–85% of the life of a fresh tool can be achieved.
Standard drills and end mills get reground routinely. Complex step, combination and form tools usually get scrapped — because most regrinders cannot restore the geometry. Re-New is built for exactly those tools.
Stated by Aayudh Tools
80–85%
of the life of a fresh tool can be achieved after renewing, as stated in Aayudh's published material. Actual result depends on the tool and its condition — send a sample and we will assess it.
Collect
Worn tools picked up with your batch.
Assess
Wear checked against the original geometry.
Regrind
Reground at Aayudh, including complex forms.
Return
Back on the machine instead of into scrap.
We are the distributor. The tools are ground at Aayudh's plant in MIDC Waluj on CNC 6-axis grinding machines, with inspection equipment to match.
Multi-axis grinding for complex and combination geometries.
Flute form and finish ground under coolant on Rollomatic equipment.
Tool geometry verified on Walter Helicheck measuring equipment.
Worn tools reground and returned to service through the Re-New process.
Our role
Onkarap Signages Pvt. Ltd. is a trading company. Our cutting tools division is an authorised distributor for Aayudh Synergies Pvt. Ltd., supplying cutting tools — solid carbide, HSS, brazed and special tooling — to the automotive, general engineering, oil and gas and other manufacturing industries as per client requirement, through our branches at Pune, PCMC and Satara. We handle application enquiries and coordinate supply, special-tool development and reconditioning with the manufacturer.
Tools are ground at Aayudh Synergies Pvt. Ltd.'s plant — E 70/15, MIDC Waluj, Chhatrapati Sambhajinagar (Aurangabad) 431136.
Send us your requirement
We supply cutting tools across industry — oil and gas, automotive and auto components, and general engineering are the day-to-day volume, delivered through our branches at PCMC, Pune and Satara. Aerospace and medical are named in Aayudh's own material as segments served.
Equipment and component manufacturing in corrosion-resistant and high-strength alloys — the duplex, Inconel and titanium work this range is built for.
Volume machining where cycle time and cost per component decide the tooling.
Job shops and fabricators running mixed batches across materials.
Named in Aayudh's material as a segment served with advanced-material tooling.
Named in Aayudh's material as a segment served with advanced-material tooling.
Sector imagery shown for context. These are illustrative photographs of the oil and gas industry, not projects executed by Onkar AP Signages.
Tooling is selected against the material and the operation — the corrosion-resistant and high-strength alloys that dominate oil and gas work are the same ones this range is built around. Tell us what you are cutting and we will come back with a recommendation.
Send a component drawing. Aayudh's engineers design the tool around the operation, and we manage the loop from enquiry to first article.
Reconditioning of worn tools — including complex and combination tools that are normally scrapped rather than reground.
Tool selection worked against your material, machine and cycle time rather than picked off a size chart.
Reviewing cost per component — not cost per tool — across combination tooling, regrind cycles and substitution options.
Scheduled supply coordinated against your consumption so a running line does not wait on tooling.
Enquiry, quotation, delivery and reconditioning handled locally instead of chased across a supply chain.
We take the component and the operation first, then work back to the tool.
Direct access to Aayudh's special step, combination and form tool capability.
We coordinate the Re-New cycle so worn tools go back into service instead of into scrap.
Aayudh has supplied solid carbide tooling to Indian industry for over a decade.
Scheduled replenishment planned against your consumption, served from three branches.
The fastest route to the right tool is the drawing and the material. Send those and we'll come back with a recommendation and a price.
Our role
Onkarap Signages Pvt. Ltd. is a trading company. Our cutting tools division is an authorised distributor for Aayudh Synergies Pvt. Ltd., supplying cutting tools — solid carbide, HSS, brazed and special tooling — to the automotive, general engineering, oil and gas and other manufacturing industries as per client requirement, through our branches at Pune, PCMC and Satara. We handle application enquiries and coordinate supply, special-tool development and reconditioning with the manufacturer.
Godown No. 03, Sr. No. 320, opp. Jog Maharaja Garden, near PCMC Swimming Pool, Pimpri Gaon, Pimpri Colony, Pimpri-Chinchwad, Pune, Maharashtra 411017
Fields marked * are required. Everything else helps us quote faster.